Stationary Conveyors / Systems

Stationary Conveyors / Systems

We offer a streamlined design of highly-productive material handling systems.

From tripper systems to loading and unloading railcars, trucks and ships, we have the right design, components, installation and support for every application.

Model	Information
Plant Conveyors	Built to custom specifications
Tunnel Reclaim	Built to custom specifications
Loading / Unoading Systems	Built to custom specifications
Tripper Conveyors	Built to custom specifications
Overland Conveyors	Built to custom specifications

Facts & Figures

Don't Let America Dead End

Close

Close

Select A Calculator

Select a calculator from the drop down above.

Cost & ROI

Complete the tables with numbers specific to your operation to run a rough return on investment analysis.

ROI Estimating Sheet

Purchase Price
Average Cost of Operation
Operating Hours
Production Rate
Product Selling Price

ROI Results

Production tons/year
Value of Production /year
Operating Cost /year
Net Income/Year
Net ROI/Year
Net ROI/Ton

Horsepower

Horsepower Calculator

Conveyor Width in
Enter Conveyor Center to Center Length in ft (0 - 400 ft) ft
Enter Change in Elevation (0-100 ft) ft
Enter Required Capacity (STPH) (0-1000) STPH

Results

Required Running Horsepower (Headshaft) HP

Drive efficiency needs to be taken into consideration to determine the motor HP required. This can be an additional 10-15% above the headshaft HP. The ability to start a loaded conveyor will also require additional HP consideration.

Horsepower calculations based on 350 fpm conveyor speed.

Belt Width

Belt Width Calculator

Material Top Size
Required Capacity (0-1100 STPH) STPH
Material Gradation

Results

Recommended Belt Width inches

Fines are defined as material with a size that is less than 10% of the maximum material size of the sample.

Belt width recommendations are based on a belt speed of 350 fpm and 80% of maximum volumetric belt carrying capacity.

Capacity is based on a material density of 100 pounds per cubic ft, 37.5 degree angle of repose material and 3-roll, 35 degree idlers.

Discharge Height

Discharge Height Calculator

Enter Conveyor Length (L) ft
Angle of Incline (θ)* deg

Results

Discharge Height ft

* Conveyor Inclines of 18 degrees or less are typical for aggregate and mining applications.

Standard Radial Stacking Conveyor Stockpile

Standard Radial Stacking Conveyor Stockpile

Conveyor Length ft
Angle of Inclination deg
Enter Degrees of Radial Travel (270° or less) deg

Pile Dimensions and Capacities

Pile Height (H) ft
D ft
Conical Pile Volume yd^3
Conical Pile Volume (100 pcf material) ton
Radial Pile Volume yd^3
Radial Pile Volume (100 pcf material) ton

Capacity is based on 100 pounds per cubic foot, 37.5 degree angle of repose material.

Super Stacker Conveyor Stockpile

Super Stacker Conveyor Stockpile

Conveyor Length ft
Type of Pile
Enter Degrees of Radial Travel deg

Pile Dimensions and Capacities

Pile Height (H) ft
D ft
Conical Pile Volume yd^3
Conical Pile Volume (100 pcf material) ton
Radial Pile Volume yd^3
Radial Pile Volume (100 pcf material) ton

Capacity is based on 100 pounds per cubic foot, 37.5 degree angle of repose material.

Belt Capacity

Conveyor Belt Carrying Capacity at Various Speeds.

Conveyor Belt Capacity Calculator

Belt Speed FPM
Belt Width inches

Results

Belt Carrying Capacity STPH

Belt carrying capacity is based on a theoretical 100% full load cross section. To use this information for conveyor sizing, use 75%-80% of the carrying capacity shown above.